AT45DB041B-TI【PDF 1/35 页】IC FLASH 4MBIT 20MHZ 28TSOP

收藏本站

您好，
买卖IC网欢迎您。
请登录
免费注册

买卖IC网

Sheet目录313

[1页]2页 3页 4页 5页

Features

Single 2.5V - 3.6V or 2.7V - 3.6V Supply

Serial Peripheral Interface (SPI) Compatible

20 MHz Max Clock Frequency

Page Program Operation

– Single Cycle Reprogram (Erase and Program)

– 2048 Pages (264 Bytes/Page) Main Memory

Supports Page and Block Erase Operations

Two 264-byte SRAM Data Buffers – Allows Receiving of Data

while Reprogramming the Flash Memory Array

Continuous Read Capability through Entire Array

– Ideal for Code Shadowing Applications

Low Power Dissipation

– 4 mA Active Read Current Typical

– 2 μA CMOS Standby Current Typical

Hardware Data Protection Feature

5.0V-tolerant Inputs: SI, SCK, CS, RESET, and WP Pins

Commercial and Industrial Temperature Ranges

Green (Pb/Halide-free/RoHS Compliant) Package Options

4-megabit

2.5-volt or

2.7-volt

DataFlash ?

AT45DB041B

1. Description

The AT45DB041B is an SPI compatible serial interface Flash memory ideally suited

for a wide variety of digital voice-, image-, program code- and data-storage applica-

tions. Its 4,325,376 bits of memory are organized as 2048 pages of 264 bytes each. In

addition to the main memory, the AT45DB041B also contains two SRAM data buffers

of 264 bytes each.

The buffers allow receiving of data while a page in the main memory is being repro-

For New

Designs Use

AT45DB041D

grammed, as well as reading or writing a continuous data stream. EEPROM emulation

(bit or byte alterability) is easily handled with a self-contained three step Read-Modify-

Write operation. Unlike conventional Flash memories that are accessed randomly with

multiple address lines and a parallel interface, the DataFlash uses a SPI serial inter-

face to sequentially access its data. DataFlash supports SPI mode 0 and mode 3. The

simple serial interface facilitates hardware layout, increases system reliability, mini-

mizes switching noise, and reduces package size and active pin count. The device is

optimized for use in many commercial and industrial applications where high density,

low pin count, low voltage, and low power are essential. The device operates at clock

frequencies up to 20 MHz with a typical active read current consumption of 4 mA.

To allow for simple in-system reprogrammability, the AT45DB041B does not require

high input voltages for programming. The device operates from a single power supply,

2.5V to 3.6V or 2.7V to 3.6V, for both the program and read operations. The

AT45DB041B is enabled through the chip select pin (CS) and accessed via a three-

wire interface consisting of the Serial Input (SI), Serial Output (SO), and the Serial

Clock (SCK).

All programming cycles are self-timed, and no separate erase cycle is required before

programming.

3443D–DFLSH–2/08

发布紧急采购，3分钟左右您将得到回复。

采购需求

(若只采购一条型号，填写一行即可)

*型号	*数量	厂商	批号	封装

添加更多采购

采购需求

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

发布成功！您可以继续发布采购。也可以进入我的后台，查看报价

我的联系方式